Skype Me™!
Product Details
Skyrc B6 Ultimate 400W Compact Balance Charger
  • Model: U400W

Skyrc B6 Ultimate 400W Compact Balance Charger

Skyrc B6 Ultimate 400W Compact Balance Charger

item#: U400W

item#: U400W
Operating voltage range: DC 12.0-18.0 Volt
Circuit power: Max. Charge power 400Watts
Max. Discharge power 25Watts
Charge current range: 0.1-20.0A
Discharge current range: 0.1-5.0A
Current drain for balancing Li-Po/Ion/Fe: 300mA/cell
Li-ion/Fe/Polymer cell count: 1-6cells
NiCd/NiMH battery cell count: 1-18cells
Pb battery voltage: 2-20V
Net Weight: 720g
Dimension: 145x141x60mm

Special features
Optimized operating software
Ultimate 400W features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for Lithium batteries, it
can prevent the overcharging which may lead to an explosion due to the user's fault.
It can disconnect the circuit automatically and alarm once detecting any malfunction.
All the programs of this product were controlled through two way linkage and com-
munication,to achieve the maximum safety and minimize the trouble. All the settings
can be configured by users!

Internal independent lithium battery balancer
Ultimate 400W employs an individual-cell-voltage balancer. It is not necessary to
connect an external balancer for balance charging.

Balancing individual cells battery discharging
During the process of discharging, Ultimate 400W can monitor and balance each
cell of the battery individually. Error message will be indicated and the process will
be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to various type of lithium battery
Ultimate 400W is adaptable to various types of lithium batteries, such as Li-ion,
LiPo and the new LiFe series of batteries.

Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, fast charge reduce the duration of
charging, whereas store state can control the final voltage of your battery, so as to
store for a long time and protect useful time of the battery.

Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle
of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the
process will be terminated automatically.

Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH
battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO'
charging mode.

Capacity limit
The charging capacity is always calculated as the charging current multiplied by time.
If the charging capacity exceeds the limit, the process will be terminated automatically
when you set the maximum value.

Temperature threshold
The battery internal chemical reaction will cause the temperature of the battery to rise.
If the temperature limit is reached, the process will be terminated.This function is available
by connecting temperature probe, which is not included in the package.

Processing time limit
You can also limit the maximum process time to avoid any possible defect.

Data store/load
For user’s convenience, it can store maximum 10 data of different batteries.
You can establish the data contains program setting of the battery to charge or discharge.
These data can be called back at any time you need and the process can be executed
without program setting.

Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable
for battery refreshing and balancing to stimulate the batterys activity.

Add to Cart:

This product was added to our catalog on Wednesday 14 March, 2012.