Skype Me™!
:
Product Details
R-605 Compact Balance Charger
  • Model: R-605

R-605 Compact Balance Charger

$45.99
EXTREME R-605 Compact Balance Charger Green Color

item#: R-605
Specifications
Operating voltage range: DC11.0-18.0 Volt
Circuit power: Max.charge power 50W
Max.discharge power 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300mA /cell
NiCd/NiMH battery cell count:1-15cells
Li-ion/Polymer cell count:1-6cells
Pb battery voltage:2-20V
Net weight: 277g
Dimension: 133x87x33mm

Introduction
This eXtreme 605 is a rapid charger with a high performance microprocessor
and specialized operating

SoftwareOptimized operating software
eXtreme 605 features an AUTO function that controls the charge rate during
charging and discharging. For Lithium batteries, this can prevent overcharging
which may lead to an explosion due to the user's setting the charge rate improperly.
It will disconnect the circuit automatically and initiate an alarm if there is any
malfunction. All the operating modes of this charger are controlled through
two way communication, between the charger and the battery to achieve
maximum safety. All the settings can be configured by the user.

Internal independent lithium battery balancer
The eXtreme 605 employs an individual-cell-voltage balancer. It is not necessary
to connect an external balancer for balance charging.

Balancing individual cells battery discharging
During the process of discharging, the eXtreme 605 can monitor and balance
each cell of the battery individually. An error message will be indicated and the
process will be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to various types of lithium battery
eXtreme 605 is adaptable to various types of Lithium batteries, such as Li-ion,
LiPo and the new LiFe series of batteries.

"Fast" and "storage" mode of lithium battery
There are various methods of charging Lithium batteries. "Fast" charge
reduces the charging time whereas "store charge" can control the final voltage
of your battery. This method is best for long term storage and protects the useful
life of the battery.

Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on
the principle of the Delta-peak voltage detection. When the battery's voltage
exceeds the threshold, the process will be terminated automatically.

Automatic charging current limit:
You can set the upper limit of the charge current when charging your NiCd or
NiMH batteries.This is useful for NiMH batteries of low impedance and capacity
in the 'AUTO' charging mode.

Temperature threshold:
The batteries internal chemical reaction can cause the temperature of the battery
to rise during charging. If the temperature limit is reached (set by the user), the
charging process will be terminated. This function is available by connecting an
optional temperature probe, which is not included in with the charger.

Processing time limit:
The user can set the maximum charging time. If the charging time exceeds the limit, the
process will be terminated automatically when you set the maximum time for the charging
mode.

Data store/load
The "" can store data from ten different batteries. The user can set the charging /
discharging parameters for a particular battery type and "call up" these settings to
charge a battery without additional programming needed.

Cyclic charging/discharging
Batteries can be set to charge/ discharge for 5 cycles if needed.

Add to Cart:


This product was added to our catalog on Thursday 15 March, 2012.

Customers who bought this product also purchased...